Mon–Fri 8:00am – 5:00pm 135, 5065 13 St SE, Calgary (403) 217-4888
COR Certified · BBB A+

Construction Insurance Requirements in Alberta: The Coverage That Outlives Your Last Pour

Table of Contents

On an Alberta public contract, your insurance obligation does not end when the slab is finished, and it does not end at Interim Acceptance either. It runs for a year or two past the day you leave site, the owner decides which, and the standard certificate your broker fills out may certify the shorter of the two.

That gap is the part worth your attention. Limits are easy to get right because the contract prints them. What goes wrong is the tail, the named-insured line, and the moment partway through the job when the coverage quietly changes hands. After 38 years pouring concrete in this city, we have seen more trouble come out of a certificate that was filled in correctly than out of one that was filled in late.

The short answer: four policies, one certificate, two clocks

An Alberta public construction contract typically requires four things of a contractor: general liability (often as a project wrap-up), automobile liability, course of construction property coverage, and boiler and machinery coverage where the work includes pressure or mechanical equipment. Each one has a limit, a named-insured list, and an end date, and the end dates are not the same.

Alberta Infrastructure publishes its requirements as a section of its Basic Master Specification. The version written for school projects between $10M and $50M, Section 00 73 16.21 (Rev. 2023-09-07), is the clearest public statement of what a provincial owner expects, and it is the document we will work from.

What each policy has to carry

The limits scale with the project, but the structure does not. These are the figures in the school projects section:

CoverageLimitRuns until
General liability wrap-upNot less than $10,000,000 inclusive per occurrence and in the aggregate for products and completed operations; general aggregate at least $20,000,000Interim Acceptance
General liability after Interim AcceptanceSame $10,000,000 per occurrence, $20,000,000 general aggregate, in the Contractor’s name onlyFinal Acceptance
Subcontractor general liabilityNot less than $5,000,000 per occurrenceFinal Acceptance
Automobile liabilityNot less than $2,000,000.00 inclusive per occurrenceTerm of the work
Course of construction (builder’s risk)All risks, replacement cost, at least the Contract Price plus the full value of Province-supplied productsInterim Acceptance
Boiler and machinery, where the risk existsAt least the replacement value of the WorkInterim Acceptance, or until equipment is installed, tested and accepted, whichever is later

Three sub-limits sit inside the liability policy and are easy to miss at renewal: non-owned automobile liability of at least $2,000,000, sudden and accidental pollution of at least $1,000,000, and forest fire fighting expense of at least $250,000. Where a scope involves aircraft or watercraft, those carry a separate limit of not less than $5,000,000 inclusive per occurrence.

For scale, a different kind of Alberta contract sets the same architecture much higher. Schedule 11 of the Evan-Thomas water and wastewater DBFO agreement, published on open.alberta.ca, requires a project wrap-up of $25,000,000 per occurrence with a project aggregate of at least $50,000,000, contractor’s pollution liability of $10,000,000, professional errors and omissions of $5,000,000 per claim with a reporting period of at least 36 months, and automobile liability of $2,000,000. The number changes with the deal. The list of policies barely moves.

The tail is where the two forms disagree

Here is the discrepancy that matters most, and it is a real one between two live Alberta Infrastructure documents.

Section 00 73 16.21 requires that completed operations coverage continue for 24 months after Interim Acceptance. The standard Certificate of Liability Insurance, Form 00 73 16B-BPL eForm (Rev. 2026-07-31), carries a checkbox certifying that completed operations coverage remains in effect for 12 months after Interim Acceptance or Substantial Performance. Schedule 11 of the DBFO agreement, for its part, also uses 24 months, measured from Construction Completion.

Both documents are current and both are correct within their own scope. The basic certificate is the standard-tier form; the school projects conditions are a project-specific insurance section, and they call for the large-project certificate forms, 00 73 16B-LPL for liability and 00 73 16B-LPP for property, not the basic one. The practical consequence is simple and expensive: a certificate can be filled out perfectly, satisfy every box on the form, and still certify a tail that is half of what your contract requires.

Do not average the two and do not assume the form tier matches your contract. The governing document is the insurance section named in your contract. Read the tail requirement out of that section, then confirm your broker is completing the certificate form that section calls for.

“Named insured” is not “additional insured”, and it decides who answers

On the wrap-up policy, Section 00 73 16.21 is specific about the wording: “The named insureds on the insurance policy shall be the Contractor, the Province and the respective school boards.” Consultants, subconsultants and subcontractors of every tier are covered as other insureds, named or unnamed.

The distinction is not administrative. A named insured on that policy can claim directly against the insurer, and the section requires exactly that for both the liability and the course of construction coverage. Where an owner is only an additional insured, its route to the money runs through the contractor. Owners that have been through a bad loss write themselves in as named insureds, and the certificate has a field asking the broker to list them.

Two more conditions sit alongside it, and both are routinely missed at bid time. The coverage must be primary, with no pro rata sharing with the Province’s own insurers, which stops your policy from quietly becoming the second payer. And deductibles must be reasonable and subject to the Province’s approval, so a cheap premium bought with a large deductible is not automatically acceptable.

Coverage changes hands at Interim Acceptance

This is the pivot most concrete scopes do not plan for.

Until Interim Acceptance, the liability coverage is a wrap-up naming the Contractor, the Province and the school boards, and it picks up every tier below. From Interim Acceptance to Final Acceptance, the policy is in the Contractor’s name only, and the Province is not a named insured. Each subcontractor must then carry its own general liability of at least $5,000,000 per occurrence for that same window.

So the day the building is handed over, a crew that was an other-insured under somebody else’s wrap-up becomes responsible for its own limit. If a sub’s policy was written to expire at completion, the gap opens on the day everyone assumes the risk ended. The course of construction policy ends at Interim Acceptance too, which means the all-risks protection on the physical work stops while the liability obligation keeps running to Final Acceptance.

Worth noting on the property side: the section states that the course of construction requirement “cannot be satisfied with an installation floater”, and it covers the work at any location and in transit, not only once it is on site.

The certificate is a form, not a formality

Alberta Infrastructure does not accept a broker’s own paperwork. The certificate form says it plainly: “Insurer’s or broker’s certificate of insurance form is not acceptable in lieu of this Infrastructure form.” The form is completed by your agent, broker or insurer and submitted to the Tender Administrator before you start any work on site, and again on renewal, amendment or extension, or whenever the owner asks.

Every policy except automobile must be endorsed to give the owner at least 30 days’ advance written notice of cancellation, including cancellation for non-payment of premium. That endorsement is a drafting instruction to your insurer, not a line you can tick in good faith, and it is the one item we see certified without being endorsed. The insurers themselves must comply with the Insurance Act (Alberta).

What this means for a concrete subcontract

Three practical items, in the order they bite:

  1. Confirm which insurance section governs before you price the job. The limits, the named insureds and the tail all come from that section, and the master specification is public, so there is no reason to guess.
  2. Diarize your own end date, not the project’s. Your liability obligation may run to Final Acceptance and your completed operations tail for a year or two past Interim Acceptance. A policy that lapses at completion leaves you bare during the window when latent-defect claims actually arrive, which is the same window your workmanship warranty is live in.
  3. Match the certificate form to the section. Basic-tier form against a large-project section is the error that produces a 12-month tail where 24 is required.

Insurance sits beside the other two paperwork obligations that decide whether a concrete scope gets paid and stays compliant: the holdback and payment calendar on the money side, and the prime contractor designation on the safety side. All three are settled before the first truck is booked, or not at all.

Frequently asked questions

Is construction insurance legally required in Alberta? There is no single statute that sets limits for every construction contract. The requirement comes from the contract. On Alberta public work, the insurance section of the contract sets the policies, limits, named insureds and durations, and the insurers must comply with the Insurance Act (Alberta).

How long does completed operations coverage have to stay in force? It depends on which document governs your contract. Alberta Infrastructure’s school projects insurance section requires 24 months after Interim Acceptance. The basic Certificate of Liability Insurance form certifies 12 months after Interim Acceptance or Substantial Performance. Read the requirement from your contract’s insurance section, not from the certificate.

Does a subcontractor need its own general liability policy? Under a project wrap-up, subcontractors of every tier are covered as other insureds until Interim Acceptance. From Interim Acceptance to Final Acceptance, each subcontractor must carry at least $5,000,000 per occurrence of its own.

What is the difference between course of construction and general liability? Course of construction is all-risks property coverage on the work itself, written on a replacement cost basis for at least the Contract Price plus owner-supplied products, and it ends at Interim Acceptance. General liability covers injury and damage to others, and it keeps running past that date.

Can a broker’s certificate be used instead of the owner’s form? Not on Alberta Infrastructure contracts. The form states that an insurer’s or broker’s own certificate is not acceptable in lieu of the Infrastructure form.

Where this article stops

This is a reading of publicly published Alberta owner requirements, not advice on your policy. It does not price coverage, it does not tell you which insurer to use, and it does not cover professional liability for design-build scopes, asbestos abatement or environmental impairment coverage, which Alberta Infrastructure handles in a separate section, or the insurance obligations in municipal and private-owner contracts, which differ. Confirm the limits, the named insureds and the tail against the insurance section named in your own contract, and have your broker confirm the endorsements exist rather than assuming the certificate created them.

Talk to us before the certificate goes to the tender administrator

If you are putting a concrete scope into an Alberta contract and the insurance section is not yet reconciled with what your broker is about to certify, that is the hour to catch it. Reach our commercial concrete contractors in Calgary to walk the scope and the schedule before the certificate is issued, and we will tell you where we have seen the tail and the named-insured line go wrong on jobs like yours.

Sources